Smoke and heat ventilation systems (SHEVS) are a critical part of any fire-protection concept today. They are prescribed as fire prevention measures. As a developer and manufacturer of these life-saving systems and their complex control technology, which is referred to in combination as a smoke and heat ventilation (SHEV) system, LAMILUX has an excellent reputation for our ability to handle projects of any size. LAMILUX SHEV systems stand for safety compliance with EN 12101-2, DIN 18232 and various VdS rules.
CI System smoke lift builds on our CI System rooflight dome F80 and CI System sandwich flaps, with suitable SHEVS control technology added.
CI System smokelift F80 Open/Close
The smoke and heat ventilation system can be opened and closed either with CO2 (80g each, plus the volume in the CO2 line) or compressed air at 6 to 8 Bar.
The optional closing system is used for simple, pneumatic closing after a functional test or inadvertent triggering via the alarm box. The benefits: no need to close domes via the roof – a time-consuming operation. This means that you can test the function of the CI System smoke lift at short intervals, and simply via the alarm box.
Spoilers help to increase the effective, aerodynamic smoke extraction surface, and thus improve the efficiency of the SHEV system considerably. Spoilers are fitted to the exterior of the rooflight dome as wind baffles.
The variants:- CI System smoke lift F80 "Open only" with or without spoiler
- CI System smoke lift F80 "Open/Close" with or without spoiler
Control systems:
Our control systems are either pneumatically or electrically operated. Your choice of control system should be driven by the function you require
For more details on the LAMILUX CI System rooflight dome look here.
LAMILUX CI System smoke lift F80
function: smoke exhaust: SHEVS open only, SHEVS open/ close; daily ventilation
physics: Ug with double layer = 2,6 bzw. 2,7 W/(m²K)
Ug with triple layer = 1,8 W/(m²K)
frames: made out of rigid PVC with aluminium profile, construction material classification B2/ A1,
fittings: stainless steel, construction material classification A1
composition top section
| Materials |
PMMA acrylic glass |
PETG |
GRP* |
| fall-trough-proof during mounting as per German BG standard |
no |
yes |
yes |
| hail-proof as per EMPA-norm |
no |
yes |
yes |
| construction material classification |
B2 |
B1 |
B2** |
* can be deliverd as sandwichpanel
** also available as hard roof as per DIN 4102-7
LAMILUX upstands
function: ideal connection to the building
| composition of upstands 30, 40 und 50 cm |
|
|
|
| material |
GRP |
sheet steel |
aluminium |
| construction material classification |
B2 |
A1 |
A1 |
| DIN 18234 fulfilled without extra measurements such as graved fill |
yes |
yes |
no |
Sizes and aerodynamic values
| size |
Aw-value (m²) sloped upstand |
Aw-value (m²) steep upstand |
| 100/100 |
0,60 |
0,75 |
| 100/150 |
0,90 |
1,12 |
| 100/200 |
1,30 |
1,50 |
| 100/240 |
1,56 |
1,80 |
| 100/250 |
1,62 |
1,87 |
| 100/300 |
1,95 |
2,25 |
| 120/120 |
0,93 |
1,08 |
| 120/150 |
1,17 |
1,35 |
| 120/180 |
1,40 |
1,62 |
| 120/240 |
1,87 |
2,16 |
| 120/300 |
2,34 |
2,70 |
| 125/125 |
1,01 |
1,17 |
| 125/250 |
2,03 |
2,34 |
| 150/150 |
1,46 |
1,68 |
| 150/180 |
1,75 |
2,02 |
| 150/200 |
1,95 |
2,25 |
| 150/210 |
2,05 |
2,36 |
| 150/240 |
2,34 |
2,70 |
| 150/250 |
2,44 |
2,81 |
| 150/300 |
2,93 |
3,37 |
| 180/180 |
2,11 |
2,43 |
| 180/240 |
2,81 |
3,24 |
| 180/250 |
2,93 |
3,37 |
| 200/200 |
2,60 |
3,00 |
This rooflight dome drive system was specially designed for use with LAMILUX rooflight domes. The drive system opens rooflight domes up to a size of 150 x 150cm to 172° in less than 60 seconds. The 24 V or 230 V rack drive in combination with a rooflight dome is designed for a lifetime of 11,000 double strokes. Fully electric SHEV systems can be built using a combination of VdS approved controls and actuation devices by D+H. This system can also be used for ventilation with a ventilation button, or ventilation button controlled stroke height, on the central control panel. * Pursuant to DIN 18232 requirements, automatic actuation via smoke or heat alarms is required. Your benefits at a glance:- Rooflight dome fittings with integrated 24 V or 230 V opening device
- Large opening angle 172°
- Fast opening within 60 seconds
- Can be used for SHEVS and ventilation
- Low power consumption
Many European countries have special rules for stair wells. In most cases builders are required to fit electrically controlled, mains independent, smoke evacuation systems. For this purpose LAMILUX supplies smoke and heat ventilation systems custom-built for stair wells, although they can also be fitted in any type of building.
Connective lines for motors - wire cross sections
| number of motors |
max. length of wire in metre |
|
(double cross section) |
| |
3 x 1,5 mm² |
3 x 2,5 mm² |
5 x 2,5 mm² |
| 1 |
100 |
170 |
300 |
| 2 |
50 |
85 |
150 |
Your benefits at a glance:- Battery powered
- Electrically controlled with ventilation facility
- Supplied in kit form with all required motors, assembly instructions and connection plans
- Simple fitting by electrician
- Suitable for SHEV systems in roofs and on façades
The LAMILUX Standard Set comprises:- Electric motor 500 mm stroke, 24 V, switch-off under load
- Control unit for a maximum of two motors with control connectors for SHEVS and ventilation buttons, and various peripherals such as smoke alarms, thermal alarms or wind and rain sensors
- Two SHEVS buttons with visual display, surface mounted
- Flush mounted ventilation button for 55er back box
|
