Stability thanks to intelligent components - the active torque absorber (ADA)
The ADA compensates different expansion values between tensioning belts and seals in the continuous rooflight. This prevents seals from slipping out even when the rooflight construction is subjected to heavy load. This in turn means best-of-breed protection in case of snow, ice, wind or heat.

Safety thanks to new technologies – dynamic torque control (DMR)
DMR means improved anchoring of the glazing by means of polycarbonate plates in the ventilation and smoke and heat ventilation system and heat extraction flaps. Perfect absorption and cushioning of loads. That means: more protection against storms and heavy snow.

Free of heat bridges thanks to innovative technology – the isothermal load converter (ITL)
Deploying ITL at the base of the construction in combination with heat bridge-free lid sections and optimized transoms gives CI System continuous rooflight B excellent heat insulation properties. ITL channels the load on the continuous rooflight into the supporting structure. This keeps the base profile free of loads and torsion, thus enabling the use of materials with excellent heat insulation properties.

New glazing made of polyester shell elements is highly resistant to UV incidence and weathering due to its special material characteristics.
This continuous rooflight was specially designed for use in areas in which aggressive materials are released, such as evaporating cooling lubricants in metal working. The material provides long-term resilience against damage by aggressive materials.

If needed, you can equip CI System continuous rooflight B with smoke and heat ventilation devices that fulfil the requirements of EN 12101-2. Natural smoke and heat ventilation (SHEV) devices are integrated as double or single flaps, which are actuated by automatic thermal triggering, thermal CO2 remote actuation, or electrical remote actuation independently of the mains power supply. SHEV devices can be actuated for ventilation (electrically/pneumatically) and for fair weather ventilation (pneumatically).

Please click on one of the images to expand the overview of SHEVS single and double flaps.
Click here for more information on the CI System smoke lift B.

• CO2 opening:
  - 1 pipe system required
  - closing from roof

• CO2 opening and pneumatic ventilation:
  - Site-side compressed air
  - 2 pipe system required
  - Open/close from below possible
  - Ventilation position 90°

• CO2 opening and electric ventilation:
  - 1 pipe system required
  - closing from roof for maintenance

• CO2 opening:
  - 1 pipe system required
  - closing from roof

• CO2 opening and pneumatic ventilation:
  - Site-side compressed air
  - 2 pipe system required
  - Open/close from below possible
  - Fair weather ventilation 120°

• CO2 opening and electric ventilation:
  - 1 pipe system required
  - closing from roof for maintenance
  - Alternatively pneumatic ventilation with 2 pipe systems

• SHEVS actuation via thermal triggering device
• SHEVS actuation via alarm cabinet "OPEN ONLY"
• SHEVS actuation via alarm cabinet "OPEN/CLOSE"
• SHEVS actuation via SHEVS-DIN pushbutton / alarm cabinet with electrical remote actuation

Hard DIN 4102-7 compliant roofing and complies with DIN 18230 rules for fire resistance time CI System continuous rooflight B
Glazing can fulfil the conditions for "rigid roofing" and "fire resistance time" at the same time – or comply with these two characteristics separately. It thus fulfils the DIN 4102-7 requirements for flying sparks and radiated heat – as confirmed by MFPA Leipzig GmbH (Approval no. PZ III/B-05-028)

Solar protection with deciduous tree effect and permanent, certified fall-through safety
Metal screen in any RAL coating you require with deciduous tree effect for natural shade. Deciduous tree effect screens fulfil GS Building 18 standards for permanent fall-through safety. In addition to this, the stamped steel sheet provides protection against hail and incidental UV light.

Powerful ventilators on fronts:
Powerful fans can be fitted to the front of the continuous rooflight for additional ventilation and air extraction.

Personal protective equipment (PSA)
Lanyard rings for the protection of persons on the roof fulfil DIN EN 795 Class A1 requirements and are BG approved – certified by Safety Technology Center of the  Berufsgenossenschaft (employers' liability insurance association) Rhineland and Westphalia. The eyes are designed to bear the weight of two persons.

Upstands and aluminum profiles in RAL colors
LAMILUX steel upstands and all visible aluminium profiles can be custom coated in RAL colours on request.