LAMILUX Continuous Rooflight: The technical details

Head and base point

Head point by the example reveal

1 frame profile4 external plug-in sealing
2 terminal strip5 PC panel
3 internal plug-in sealing6 breathable tape

 

 

Base point by example reveal

1 terminal strip5 adapter foot profile
2 foot profile6 connecting seal
3 side edge windowsill7 vapour-proofed butyl seal
4 windowsill

Unique selling propositions (USPs)

H-Sprosse

  • Long continuous rooflights W/R have an expansion joint 
  • Stabilization of the panels (no need of additional pipes for the panel reinforcement on the flaps)
  • Execution with (left side of the representation) and without (right side of the representation) secondary drainage possible.

Secondary seal

The connection seal is a continuous EPDM profile, which is fitted on the upstand and has a flexible, perforated leg, which runs downwards the upstand.

1 foot profile with terminal strip4 terminal strip optional
2 adapter profile optionally usable5 put under sealant (e.g. Dichtflex)
3 connecting seal foot profile

Tandem-serial flaps
Ventilation with tandem-serial flap systems

Previous state of the art

LAMILUX solution: Ventilation flaps can be installed directly next to each other.
More ventilation area with the same continuous rooflight surface.

TANDEM-SERIAL SHEV FLAPS

Previous state of the art

Own LAMILUX NSHEV (certified according to DIN EN 12101-2): SHEVs can be installed directly next to each other.

 

More ventilation area with the same continuous rooflight surface.

TIP Technology (Total Insulated Product)

Optimized isothermal characteristics for consistent heat insulation zones without weaknesses provide perfect heat protection in all zones of the overall construction: evidence for maximum energy efficiency.

LAMILUX prices this thermal bridge-free and thermally separated construction with the TIP label.

The energy efficiency properties are calculated and certified according DIN EN 10077 T1 and T2.