Glass Element F100 round Version

Advantages | Glass Element F100 round Version



Energy efficiency

  • NEW: Available with 2 or 3 layer insulation glazing (toughened safety glass TSG and optional matt-light LSG film) with Ug value from 1.1 to 0.6 W/(m²K)
  • NEW: Construction avoids thermal bridges completely with Uw value from 1.1 to 0.76 W/(m²K) depending on the glazing (according to EN ISO 10077-1, Ø 120 cm)
  • NEW: Thermal insulated, seamless GRP upstand of 70 cm, 50 cm, 30 cm height with U value ≥ 0.68 W/(m²K)
  • NEW: Outstanding air tightness due to new balloon sealing system: Performance class 4 – certified according to EN 12207

Comfort & design

  • NEW: Goodbye to dirty edges: The new design of the frame profile provides a smooth crossover between glazing and frame profile. Rain water can run-off easily
  • NEW: Our CI System Glass Element F100 is BIM ready – Available at bimobjects.com
  • Permanently clear view and generous daylight incidence by scratch insensitive glazing
  • Inside white, silk matt finish – No additional drywall works needed

Stability

  • NEW: Certified water tightness even with very strong wind force (tightness against driven rain according to EN 12208 class E 1950)
  • NEW: Very high load carrying capacity by optimised profiles
  • Tested fall-through protection
  • High stability against wind and snow load
  • UV-resistant edge compound

Safety

  • Safe against condensation between the panes by thermal decoupled edge seal (in contrast to plastic domes)
  • Preventive fire protection: Compliance of DIN 18234 to prevent fire extension on the roof without any additional measures (e.g. gravel fill)
  • Use as a SHEV system in staircases
  • Delivery of CI System Glass Element F100 completely pre-assembled on the upstand

Fittings | Glass Element F100 round Version


Glazing

Values2-layer insulation glazing3-layer insulation glazing
Ug Valueapprox. 1.1 W/(m²/K)approx. 0.6 W/(m²/K)
Energy transmissionapprox. 61%approx. 51%
Sound insulationapprox. 61 dBapprox. 39 dB
Light transmissionapprox. 80%approx. 72%
  • Optional opal thermal insulation glazing with matt-light film
  • Outer pane TSG


AVAILABLE SIZES 

Dimensions for ordering (Ø top roof edge size)
   60
   80
   90
  100
  120
  150
  180

Upstand

  • Available upstand heights: 30, 50, 70 cm
  • Upstand manufactured seamless
  • Meets requirements of DIN 18234 without any additional measures
  • Glass element pre-assembled on the upstand ex works

Smoke extraction of stairwells

Smoke extraction of stairwells becomes easy and simple with our standard sets for smoke extraction for stairwells. No complex SHEV calculations needed. Click here for more information.

Accessories | Glass Element F100 round Version


Ventilation Units

Depending in size, the following alternatives are available:

  • 24 V – Spindle drive solo
  • 24 V – Spindle drive tandem

Wind and rain sensor

  • For automatic opening and closing of the glass elements during wind and rain
  • For group or single control

REED Contact

  • Magnetic switches integrated into the frame profile for a contactless switching operation
  • Signalling of the opening position (closed/ open) of the daylight system
  • Connection to the alarm system possible

TECHNICAL DETAILS | Glass Element F100 round Version


CONSTRUCTION DETAILS

LEADING TECHNOLOGY:

  • Integration of 3-layer insulation glazing with very good Ug vales
  • Outstanding, certified air tightness due to new balloon sealing system
  • GRP upstand completely insulated, manufactured seamless and therefore 100% vapour tight
  • Very high load carrying capacity by optimised profiles
  • UV-resistant edge compound
  • Smooth crossover between glazing and frame profile. Rainwater can run-off easily without any dirty edges
  • Border frame completely free of thermal bridges with certified tightness against driven rain according to EN 12208 E1500 (equals to a driven rain load of a so called wind force of 14)
  • Meets DIN 18234 without any additional measures

ENERGY EFFICIENCY

The CI System Glass Element F100 provides ideal insulation all-around within a compact system without any thermal bridges. Uw value 1.3 – 1.0 W/(m²K) are calculated according to EN ISO 10077-1, are referring to a reference object of 120 cm Ø and are depending on the chosen glazing. 

ISOTHERMS – VISUALISE INSULATION

Optimised processes of isotherms for continuous thermal insulation zones without weaknesses are the perfect insulation in all zones of the overall construction – expression of the best energy efficiency. LAMILUX calls this concept which avoids thermal bridges completely

TIP – Total Insulated Product