LAMILUX Flat Roof Exit Comfort Duo
Individual Luxury – Daylight at its best
The benefits at a glance
Flat Roof Exit Comfort Duo
Design & Comfort
- Generous daylight incidence
- Convenient access to the roof terrace via stairs (on-site)
- Self-cleaning due to 5° inclined upstand
- Partial glazing on a 3° sloping upstand on the eaves side
- Infinitely variable ventilation position of both leaves
- Clear optics: no interfering edges and no visible drive units in the interior
- Variety of colours according to RAL card (edging profiles)
- leaf system, motor opener and upstand are completely pre-assembled at the factory
ENERGY EFFICIENCY
- Complete construction without thermal bridges
- Completely thermally insulated upstand
- Can be equipped with the highest quality functional glass
- Minimized risk of condensation
Safety
- Closing and opening from outside possible via optional key switch (min. IP54)
- Emergency stop function during closing by light barrier
- Compliance with DIN 18234 without additional measures (prevention of fire expansion on the flat roof)
- As a standard: Outer pane TSG, inner pane LSG
- Resistance to external fire exposure from flying sparks and radiant heat with classification Broof(t1) according to DIN EN 13501-5
- Fall-through proof according to DIN 18008-6
Equipment Variants
Flat Roof Exit Comfort Duo
Glazing Types
Our glazing offer considers the following individual aspects
- Daylight incidence - transparency and light scattering
- Energy efficiency / thermal insulation
- Sun protection / heat protection
- soundproofing
- self-cleaning
| Description | Ug-value | Light transmission | Total energy permeability | Sound insulation |
|---|---|---|---|---|
W102 | 1,1 W/(m²K) | 80 % | 62 % | 38 dB |
| W103 (with matt, light-coloured film) | 1,1 W/(m²K) | 54 % | 59 % | 38 dB |
VENTILATION DRIVES
- 4 x 24 V linear drives, weatherproof, with control panel
- Protection class IP 65, 1 A power consumption per motor
Upstand - Stability and thermal insulation
The seamlessly manufactured upstand (top roof edge dimensions 120 x 300 cm) forms the base for the construction. It provides the ideal thermal connection to the building structure. The LAMILUX upstands made of glass-fibre reinforced plastic are CFC-free, completely pigmented white and thermally insulated with rigid polyurethane foam. They have a weatherproof seal and are not considered to be burning drips and comply with DIN 18234 without additional measures. LAMILUX upstands have a closed box cross-section - this makes them very stable and torsion-resistant.
The continuous insulation, at least 55 mm thick, ensures an excellent heat transfer coefficient of 0.6 W/m²K. The upstand is 40 cm high on the eaves side and rises by 3° to 55 cm on the ridge side. This supports the self-cleaning of the element.
ENERGY EFFICIENCY
Isothermal lines indicate points featuring the same temperature and reveal a measurable customer benefit in a thermal diagram. The 10° isothermal line, for example, is a measured variable used in building physics to ensure protection against condensate. If this line wanders outside the confines of a structure, condensate or even hoar frost will form precisely at this point.
